Production Number: XXXXXXXX Made in China 2 / 2
Parts List
Part# Description QTY Image
A
Crane with head up
1
B
Crane with head down
1
Parts List
Part# Description QTY Image
AA
Stake
50x135xD6mm
4
ASSEMBLY STEPS:
1. Choose a level location for set up. It is recommended
that you choose a location that can accommodate ground
stakes.
2. Place Crane in desired location.
3. Insert 2 ground stakes (included) through the holes on
feet (1 at the front & 1 at the back) to secure Crane (A).
Repeat this step for the other crane.
4. If necessary, use a rubber mallet to completely secure
the ground stakes into the ground.
5. Depending upon soil conditions, adjusting stakes from
time-to-time may be required.
To Previous Page
Loading...
