ASSEMBLY INSTRUCTIONS
ITEM# L-GZ428PST
20’ x 20’ PARTY PAVILION
Our clear, easy-to-follow, step-by-step instructions will guide you through the project from start to finish. The
final product will be a quality piece that will go together smoothly and give years of enjoyment.
WARNINGS:
1. Assembly Instructions must be followed.
2. Carefully consider the possibility of falling rocks or tree limbs, lightning strikes, flash floods, avalanches,
strong winds, and other objective hazards to reduce the risk of injury to the occupants, or damage to the
canopy.
3. Anchor your canopy properly at all times to reduce the risk of injury to the occupants, or damage to the tent.
This includes staking out all guy lines, and securing the canopy top to the center pole by staking down and
adjusting the center peak rope.
WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC.
This tent meets the flammability requirements of CPAI-84. The fabric may burn if left in continuous contact with
any flame source. The application of any foreign substance to the tent fabric may render the flame-resistant
properties ineffective.
Tools required: hammer (not included)
To Next Page
Need help?
General
