Sunjoy L-GZ761PST User Manual

Our clear, easy-to-follow, step-by-step instructions will guide you through the project from start to finish.
All you will need is a hammer and ladder (not included) whose height is no less than 2.5m.
Item Identification: For ease of identification, all parts are labeled to correspond to the Step number in
which the part is used.
PRECAUTIONS:
 Do not cook underneath canopy.
 Do not ignite fireworks underneath canopy.
 Do not bleach canopy to clean.
 Do not dry clean.
 Do not wash in washing machine or dry in dryer.
 Lower and secure side panels if open in stormy conditions.
 Be certain to brush snow off cover in winter
 This is a temporary structure and is not recommended as a permanent structure.
Assembly Instructions
10'x20' Shelter
Item: L-GZ761PST

Sunjoy L-GZ761PST Specifications

General

Brand	Sunjoy
Model	L-GZ761PST
Category	Tent
Language	English

Summary

General Safety Precautions

Essential Safety Guidelines

Crucial safety advice for using the shelter, covering fire, cleaning, weather, and general operational safety.

Product Components and Hardware

Parts List Identification

Detailed list of all shelter components, including part codes and quantities for easy identification during assembly.

Hardware Pack Contents

Inventory of all necessary hardware such as bolts, nuts, washers, and elastic ball straps required for assembly.

Shelter Assembly Steps

Frame Assembly Layout Diagram

Visual guide showing the layout and connection points for the shelter's frame structure components.

Main Frame Construction

Step-by-step instructions for assembling the primary structural frame of the shelter using corner pieces and bars.

Top Canopy Installation

Procedure for spreading and positioning the main fabric canopy cover over the assembled shelter frame.

Short Side Panel Attachment

Method for attaching the short side panels to the shelter frame using elastic ball straps and grommets.

Post Assembly (Type 1)

Detailed steps for assembling and securing the first type of vertical support posts to the base and frame.

Securing Long Side Panels

Instructions for rolling up long side panels and fastening them to the horizontal bar with elastic ball straps.

Post Assembly (Type 2)

Steps for assembling the second type of vertical posts, including attaching stakes, ropes, and securing screw caps.

Important Information and Warranty

Assembly and Usage Guidelines

Key recommendations for safe assembly, handling, and optimal use of the shelter, including crucial safety points.

Product Warnings and Disclaimers

Critical warnings regarding assembly, fabric flammability, structural integrity, and disclaimers for proper usage.

Limited Warranty Details

Information on the product's limited warranty, coverage period, and contact details for customer support and technical assistance.