Sunlighten Amplify II Assembly Instructions

STEP 9
Connect 2 brackets to the back of the Full
Spectrum heater .
STEP 10
Connect the cable at the base of the Full Spectrum
heater to the socket at the base of the inside
front wall.
STEP 11
Fix both brackets attached to Full Spectrum
heater on either side of heater into pre-drilled
holes on front right inside corner sauna walls.
Repeat Steps 9-11 for the second FS Heater on
front left inside corner sauna walls.
N
K
8
12
9
6
12
N
K
8
9
6
N
KK
6
sunlighten.com/gb-en

Sunlighten Amplify II Specifications

General

Brand	Sunlighten
Model	Amplify II
Category	Plumbing Product
Language	English