4
Amplify SERIES SPECIFICATIONS
AMPLIFY II
Dimensions
(W x L x H)
50.9” x 45.9” x 77.7”
1,293 mm x 1,167 mm x 1,973 mm
AMPLIFY III
Dimensions
(W x L x H)
62.3” x 45.9” x 77.7”
1,583 mm x 1,167 mm 1,973 mm
REGION VOLTAGE/AMPS EXTERIOR POWER CORD
UK: NS-17
US: NEMA 5-20
It is important when installing the dedicated circuit
for your unit not to include a GFCI (Ground Fault
Interuptor) or AFCI (Arc Fault Circuit Interuptor).
These are often installed in household electrical
setups as a means of surge and arc protection, but
will mistake the power operation of our units for
these and trip the breaker, disrupting sauna use.
Please note if your codes require an AFCI or GFCI,
please install Class C to ensure unit performance.
To Next Page
Loading...
Need help?
General
