EasyManuals Logo

Sunlighten Amplify II User Manual

Sunlighten Amplify II
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
WARNING
READ BEFORE OPERATING
To reduce risk associated with hazardous voltage & re:
Unplug the sauna from electrical outlet before storage or when not in use for
extended periods of time.
Do not operate the sauna if its not on a dedicated electrical circuit, or has a
damaged power cord/plug.
If the sauna is not working properly or an odor persists, immediately unplug the sauna.
Do not leave the sauna unattended while turned on, or in use.
Never cover holes or oor grate with towels, mats, garments, etc.
PRE-INSTALLATION
1. If your sauna requires a dedicated outlet according to the table on page 4, please
have a certied electrician install a dedicated outlet for sauna. Failure to do so
will void all warranty.
2. Remember your sauna should be assembled by two or more people.
3. Do not place plumbing or plumbing xtures in or around the sauna.
4. Keep all liquids away from the heating panels, electronics, and interior wood.
5. Install sauna on a level surface.
6. Install sauna in an area that is dry and protected from the weather.
7. Keep ammable objects and corrosive chemical substances away from the sauna.
8. Installation of the sauna in an area below standard room temperature can increase
warm-up time.

Other manuals for Sunlighten Amplify II

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sunlighten Amplify II and is the answer not in the manual?

Sunlighten Amplify II Specifications

General IconGeneral
BrandSunlighten
ModelAmplify II
CategoryPlumbing Product
LanguageEnglish

Related product manuals