mPulse
®
Power Box Installation Guide
We’re very excited you received your replacement power box and are eager to get your unit
back up to optimal operation! This power box is designed with customer installation in mind
and this guide will help you through that process while avoiding any potential pitfalls.
Labeling
The wiring connections of your power box are labeled with stickers of particular shapes and
colors to help you classify them.
Each wall is assigned a different shape. Walls are labeled with the viewpoint of facing the
back wall inside the sauna. Colors correspond with different levels of power distributed to
parts of the unit - power feeds, blue sensor or NTC feeds, and green near infrared feeds.
INSTALLATION
Step 1
Unplug the unit from the power source or ip the breaker for the dedicated circuit to the sauna. You
may nd the power box area more easily accessible if you also remove the bench. What follows can
be done without bench removal, but is more efcient and comfortable with the added space.
Near Infrared (NIR) Heat Sensor (NTC) Left Wall Back Wall Front Wall Right Wall
To Next Page
Need help?
General
