STEP 3
As you insert each wall segment, you will
insert the U-clips in the pre-drilled
holes in the corner. This will keep the
walls sealed together.
The front wall will be inserted next.
Be careful of the glass door and panel
as you insert the wall.
Place right wall on the right side of floor
panel . This wall panel should sit flush
once properly seated. Make sure no gaps
are visible in the corner of the two walls as
you insert it. It should be inserted flush.
STEP 4
J
I
E
3
3
I
J
1
sunlighten.com
3
sunlighten.com
To Next Page
Loading...
