Sunmi V2 - User Manual

请自行添加一维码
内容为说明书料号
List of packaged items
Terminal device × 1
User's Guide × 1
Charger & Adapter × 1
USB Cable × 1
Wi
-
Fi Build-in Wi-Fi 802.11a/b/g/n(2.4G/5G)
Camera 5M AF / （0.3M FF optional）
FLASH 8GB Nand Flash
CPU frequency 1.3 GHz Quad Core
Keys Power key, volume key
Display 5.45 inch IPS, resolution 1440×720
Operating
system
SUNMI OS 2.0 (based on Android 7.1)
Bluetooth Support Bluetooth 4.0
RAM 1GB LPDDR3
Interfaces USB Type C， Nano SIM
Printer type Thermal Printer
Printing paper
specifications
Width 58mm, maximum diameter 50mm
Touch screen Capacitive Screen
Wireless data
2G：B2/B3/B5/B8
3G：WCDMA(B1/B2/B4/B5)
4G：B2/B3/B4/B7/B17/B28
Item Technical Specifications
Battery 7.6V/2580mAh
Outline
dimensions
L 219.1mm ×W 80mm ×H 17.8mm
Adapter
OUTPUT：DC5V/2A
INPUT：AC100~240V/0.3A 50/60Hz
User Guide
T5930
Technical specifications
Name of parts
Circuit board
(Pb) (Hg) (Cd) (Cr(VII) (PBB) (PBDE)
Toxic and harmful substances and elements
Shell
:It indicates that the content of toxic and harmful
substances in all homogeneous materials of this part is
below the limit specified in SJ/T11363-2006.
:It indicates that the content of toxic and harmful
substances is higher than the limit specified in
SJ/T11363-2006 in at least one homogeneous material of
this part; however, the the reason why the toxic substance
of that part exceeds the limit is that there is no applicable
material to replace it currently.
For products that have reached or passed the service
years for environmental protection, they should be
recycled according to Measures for Control and
Management of Electronic Information Products and
should not be thrown away at will.
Name and content of toxic and harmful substances
contained in this product are shown in the following table
Manufacture
Shanghai Sunmi Technology Co.,Ltd.
Room 505 No.388 Song Hu Road Shanghai, China
This product can be used across EU member states.
The full text of the EU declaration DOC is available at the
following internet address：www.sunmi.com
Technical features and characteristic
Operation Frequency Transmitted
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received,
including
interference that may cause undesired operation.
FCC ID: 2AH25V2
NOTE: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority
to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and
receiver.
---Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
---Consult the dealer or an experienced radio/TV technician for
help.
Body-worn Operation
This device was tested for typical body-worn operations. To
comply With RF exposure requirements, a minimum separation
distance of 1.0cm must be maintained between the user’s body
and the handset, including the antenna.
Third-party belt-clips, holsters, and similar including the antenna.
Third-party belt-clips, holsters, and similar accessories used by
this device should not contain any metallic components.
Body-worn accessories that do not meet these requirements
may not comply with RF exposure requirements and should be
avoided.
Specific Absorption Rate (SAR) information:
This wireless data POS System meets the government's
requirements for exposure to radio waves. The guidelines are
based on standards that were developed by independent
scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a
substantial safety margin designed to assure the safety of all
persons regardless of age or health.
FCC RF Exposure Information and Statement. The SAR limit of
USA (FCC) is 1.6W/kg averaged over one gram of tissue.
Device types: T5930 has also been tested against this SAR limit.
The highest SAR value reported under this standard during
product certification when properly worn on the body is
0.949W/kg（10gSAR， test distance：0mm，limit 4W/kg）and
0.983W/kg (1gSAR， test distance：5mm，limit 1.6W/kg). This
device was tested for body-worn operations with the back of
the handset kept 10mm and 5mm from the body. To maintain
compliance with FCC RF exposure requirements, use
accessories that maintain a 10mm and 5mm separation
distance between the user's body and the back of the handset.
The use of belt clips, holsters and similar accessories should not
contain metallic components in its assembly. The use of
accessories that do not satisfy these requirements may not
comply with FCC RF exposure requirements, and should be
avoided.
GSM 850
GSM 1900
WCDMA BAND II
WCDMA BAND IV
WCDMA BAND V
LTE BAND 2
LTE BAND 4
LTE BAND 7
LTE BAND 17
2.4G Wi-Fi
Bluetooth
BLE
5G Wi-Fi
5G Wi-Fi
824-849 MHz(Tx),869-894 MHz(Rx)
1850-1910 MHz(Tx),1930-1990 MHz(Rx)
1850-1910 MHz(Tx),1930-1990 MHz(Rx)
1710 -1755 MHz(Tx),2110 - 2155MHz(Rx)
824-849 MHz(Tx),869-894 MHz(Rx)
1850-1910 MHz(Tx),1930-1990 MHz(Rx)
1710-1755 MHz(Tx),2110-2155 MHz(Rx)
2500-2570 MHz(Tx),2620-2690 MHz(Rx)
704-716 MHz(Tx),734-746 MHz(Rx)
2412-2462 MHz
2402-2480 MHz
2402-2480 MHz
5150-5250 MHz
5725-5850 MHz
32 dBm
30 dBm
23 dBm
23 dBm
23.5 dBm
22.5 dBm
22.5 dBm
22.5 dBm
23 dBm
15 dBm
6 dBm
6 dBm
17 dBm
16.5 dBm

Summary

Product Description

Power Key Functions

Details the functions of the power key, including short and long press operations for waking, locking, powering on/off, and rebooting.

Volume Key Function

Explains the function of the volume key for adjusting volume levels.

Printer Usage

Describes the printer function for printing sales slips when the device is powered on.

Type-C USB Port

Details the Type-C USB port's use for device recharging and developer debugging.

Camera and SIM Card Slot

Explains the camera's use for scanning and notes the SIM card insertion procedure.

Printing and Charging Instructions

Paper Loading Procedure

Details the process of opening the paper container, feeding paper correctly, and closing the cover for printing.

Troubleshooting Blank Paper

Note advising to check paper roll direction if the printed paper is blank.

Recharging and Battery Care

Explains recharging via USB and advises on battery maintenance to prolong life.

Device Setup and Usage

Initial Device Setup

Guides on inserting the 2G/3G/4G card, powering on, and activating the screen.

WiFi Connection

Details steps to activate WLAN, connect to a WiFi hotspot, and enter access passwords.

App Download and Installation

Instructions on connecting to the internet to find, download, and install applications.

FAQ and Troubleshooting

Addresses booting failure and system crashes with relevant troubleshooting steps.

Safety Precautions and Disclaimers

General Safety Warnings

Covers adapter connection, avoiding explosive gases, unauthorized opening, and potential radio interference.

Battery Replacement Safety

Warns about explosion danger with wrong batteries and proper disposal of replaced batteries.

Handling and Environmental Advice

Emphasizes password protection, avoiding storms, power-off for anomalies, and environmental usage conditions.

Company Statements and Disclaimers

States company non-responsibility for damages and notes potential discrepancies due to product upgrades.

Technical Specifications

Operating System and CPU

Details the device's operating system (SUNMI OS 2.0) and CPU frequency (1.3 GHz Quad Core).

Memory and Storage

Specifies the RAM (1GB LPDDR3) and FLASH storage (8GB Nand Flash) capacity.

Display and Touch Screen

Provides display size (5.45 inch IPS), resolution (1440x720), and touch screen type (Capacitive).

Camera and Interfaces

Lists camera resolution (5M AF) and available interfaces (USB Type C, Nano SIM).

Wireless Connectivity

Details supported wireless technologies including 2G/3G/4G bands, Wi-Fi standards, and Bluetooth version.

Hardware and Dimensions

Covers keys, printer type, paper specifications, battery capacity, and physical dimensions.

Adapter Specifications

Specifies the adapter's output (DC5V/2A) and input (AC100~240V) requirements.

FCC Compliance and RF Exposure

FCC Rules and Operation

Outlines FCC compliance conditions and warns against unapproved modifications.

Interference Handling Measures

Provides methods to correct harmful radio interference by adjusting antenna or separation.

Body-Worn Operation Requirements

Mandates minimum separation distance and accessory requirements for RF exposure compliance.

Specific Absorption Rate (SAR)

Explains SAR guidelines and reports the highest SAR values tested for the device.

Technical Features

GSM and WCDMA Bands

Lists operation frequencies and transmitted power for GSM and WCDMA bands.

LTE Bands

Details operation frequencies and transmitted power for various LTE bands.

Wi-Fi and Bluetooth

Provides operation frequencies and transmitted power for 2.4G Wi-Fi, Bluetooth, BLE, and 5G Wi-Fi.

Product Information

Toxic and Harmful Substances

Details the presence and limits of toxic and harmful substances in the product's components.

Environmental Protection and Recycling

Outlines recycling guidelines for products reaching their service years and EU member state usability.

Manufacturer and Packaged Items

Provides manufacturer details and lists the items included in the product package.

Overview

1. Product Description
2. Usage Features
3. Maintenance Features

This document provides a comprehensive guide to the V2 device, a smart business terminal designed for various commercial applications. It covers product description, operational instructions, safety precautions, and technical characteristics.

Product Description

The V2 device is a handheld smart business terminal equipped with a printer, camera, and multiple connectivity options. It features an ergonomic design with an opening handle for easy access to internal components.

Key Components and Their Functions:

• Printer: Located at the top of the device, the printer is used for printing sales slips and other transaction-related documents when the device is powered on. It supports 58mm thermal paper with specifications of 57±0.5mm*Ø50mm.
• Opening Handle: This handle is used to open the paper container for loading thermal paper.
• Power Key: Situated on the side, this key has multiple functions:
  • Short press: Wakes up the screen or locks the screen.
  • Long press (2-3 seconds in power off mode): Switches on the device.
  • Long press (2-3 seconds in normal operation mode): Allows selection of power off or reboot options.
  • Long press (11 seconds when system is frozen): Initiates an automatic reboot.
• Volume Key: Located below the power key, it is used for volume adjustment.
• Type-C USB Port: Found on the side, this port is used for device recharging and developer debugging.
• Camera: Positioned on the front, the camera is used for payment scanning and quick scanning of 1D/2D codes.
• Speaker: Located on the front, it provides audio output.
• Extended Interface: An interface for connecting additional peripherals or accessories.
• SIM Card Slot: Located on the front, it accommodates a Nano SIM card for 2G/3G/4G connectivity.
• Battery Cover: Covers the battery compartment.

Usage Features

The V2 device is designed for ease of use, from initial setup to daily operations.

Printing Instructions:

1. Open the paper container: Use the uncovering handle to open the paper container. Avoid forcing it open to prevent damage to the print head.
2. Load paper: Feed the thermal paper correctly into the container in the specified direction, pulling some paper outside the cutter.
3. Close the cover: Close the paper container cover to complete paper feeding.
   • Note: If the printed paper is blank, check if the paper roll has been installed in the correct direction.

Recharging and Battery Instructions:

• Charging: The device charges via a USB cable.
  1. Connect a 5V adapter to a power supply socket.
  2. Connect the USB cable to the device's Type-C USB interface.
  3. The screen will display a recharging icon during the process. If the icon doesn't appear, check the USB interface connection.
• Battery: The device uses a 7.6V/2580mAh lithium battery. Do not disassemble the battery. To prolong battery life, recharge the device whenever possible and avoid letting the battery fully drain.

Extremely Easy Settings:

1. Set 2G/3G/4G: When the device is off, insert the 2G/3G/4G card, then power on. Refer to technical specifications for supported cards.
2. Initial Startup: Long press the Power Key for 2-3 seconds to activate the screen backlight. Follow the prompts on the startup/booting screen. Two modes for internet access are available.
3. Set WiFi:
   • Click the "Set" button.
   • Activate "WLAN" to enter the WLAN searching screen.
   • Wait for the device to list all available WLAN hotspots.
   • Click the desired WLAN to connect and enter the access password if it's an encrypted network.

Download/Use Apps:

• Once connected to the internet, open the App Market, search for, download, and install desired applications.

Maintenance Features

Proper maintenance ensures the longevity and optimal performance of the V2 device.

Safety Warning:

• Power Adapter: Connect the AC plug to the AC socket corresponding to the marked input of the power adapter. Do not use in the presence of potentially explosive gas. Unauthorized persons should not open the power adapter. This is a Class A product and may cause radio interference; users may need to take measures against interference.
• Battery Replacement: Risk of explosion if the battery is replaced with the wrong type. Replaced batteries must be disposed of by maintenance personnel and not thrown into fire.
• Password Protection: As a handheld device, users must protect their password from being seen by others.
• Lightning Storms: Do not install or use the device during lightning storms to avoid shock risks.
• Abnormalities: Immediately turn off the power if abnormal odor, heat, or smoke is noticed.
• Paper Cutter: The paper cutter is sharp; avoid touching it.

Suggestions for Care:

• Moisture: Do not use the terminal near water or moisture to prevent liquid from falling into it.
• Temperature Extremes: Avoid using the terminal in extremely cold or hot environments, such as near flames or lit cigarettes.
• Physical Damage: Do not drop, throw, or bend the device.
• Cleanliness: Use the terminal in a clean and dust-free environment to prevent small items from falling into it.
• Medical Equipment: Do not use the terminal near medical equipment without permission.

Troubleshooting (FAQ):

• Booting Failure (e.g., low battery):
  • Plug in the USB cable and charge for at least 3 minutes.
  • Check if the screen displays the normal charging status.
• System Crash:
  • Long press the Power Key for 11 seconds to reboot the device.
• Further Assistance: Read the installed Help App for more information.

Statements and Disclaimer:

• The company is not responsible for damages caused by improper use or maintenance, or problems caused by optional items/consumables not approved by the company.
• Users are not entitled to change or modify the product without consent.
• Changing the operating system to a third-party ROM or altering system files by cracking may cause instability and security risks.
• Due to product upgrades, some details in this document may not match the actual product, which shall govern. The company reserves the right of interpretation and modification without prior notice.

Environmental Protection:

• Products that have reached or passed their service years for environmental protection should be recycled according to regulations for Control and Management of Electronic Information Products and should not be disposed of arbitrarily.

EU Compliance:

• This product can be used across EU member states. The full text of the EU declaration DOC is available on the manufacturer's website: www.sunmi.com.

Manufacturer: Shanghai Sunmi Technology Co.,Ltd. Room 505 No.388 Song Hu Road Shanghai, China

List of Packaged Items:

• Terminal device × 1
• User's Guide × 1
• Charger & Adapter × 1
• USB Cable × 1

Sunmi V2 Specifications

General

RAM	2 GB
Storage	16 GB
Operating System	Android
Connectivity	4G
Printer	Built-in thermal printer
Camera	5 MP rear camera
Ports	USB
Supported Payment Methods	Magnetic stripe