To Next PageTo Next PageWhy does my Sunny Health & Fitness SF-E3914 make a squeaking noise?
A squeaking noise from your Sunny Health & Fitness Fitness Equipment during use might be due to loosened bolts. Inspect all bolts and tighten any that may have become loose.
What to do if there is no display on my Sunny Health & Fitness SF-E3914 Fitness Equipment?
If there is no display on the meter of your Sunny Health & Fitness Fitness Equipment, try the following: 1. Ensure the wire from the computer is properly connected to the wire from the upright post. 2. Check that the batteries are correctly positioned and the battery springs are making proper contact. 3. Replace the batteries with new ones, as the current batteries may be unresponsive.
How to stop my Sunny Health & Fitness SF-E3914 Fitness Equipment from wobbling?
To stabilize your Sunny Health & Fitness Fitness Equipment and prevent wobbling during use, adjust the end caps on the rear stabilizer as needed to level the equipment.
General| Product Type | Elliptical Machine |
|---|---|
| Resistance Levels | 16 |
| Display Type | LCD |
| Max User Weight | 220 lbs |
| Warranty | 1 Year |
| Resistance Type | Magnetic |
| Transportation Wheels | Yes |
| Power Source | Plug-in |
| Heart Rate Monitoring | Pulse Sensors |
Attach front and rear stabilizers to the main frame using specified bolts and washers.
Attach upright post to main frame and install bolt caps for a secure fit.
Connect left and right pedals to their respective tubes using bolts and washers.
Attach handlebars to swing rods with carriage bolts, washers, and nuts.
Mount the computer and connect sensor and pulse wires to the upright post.
Attach the bottle holder to the upright post using the provided bolts.
Detailed steps for installing 2 AAA batteries into the computer unit.
Instructions on how to replace used AAA batteries with new ones.
Guidelines for proper disposal of batteries according to local regulations.
Guide on using the Tension Control Knob to adjust resistance levels.
How to level the climber by adjusting the foot pads on the stabilizers.
Instructions for tilting and transporting the elliptical climber using its wheels.
Proper methods for cleaning the equipment with a soft, damp cloth.
Recommendations for storing the elliptical climber in a clean, dry environment.
Explanation of the MODE, SET, and RESET buttons for computer operation.
Details on AUTO ON/OFF, AUTO SCAN, SPEED, DISTANCE, TIME, and CALORIES tracking.
Information on how SPEED, DISTANCE, TIME, and CALORIES are displayed.
Details on ODOMETER and PULSE tracking and display.
Instructions for resetting all computer values except the odometer.
Solutions for common problems like no display, wobbling, or squeaking noises.
