What to do if the Sunny Health & Fitness SF-T1407M Treadmill computer does not work?
If the computer on your Sunny Health & Fitness Treadmill isn't working, there could be a few reasons. First, check the sensor wires (Sensor Wire No. 46, Lower Sensor Wire No. 22A, or Upper Sensor Wire No. 22B) to ensure they are correctly connected. Second, the batteries might be unresponsive, try replacing them with new ones.
Why is my Sunny Health & Fitness SF-T1407M Treadmill making noise from moving parts?
If your Sunny Health & Fitness Treadmill is making noise, it could be due to a couple of things. First, inspect all nuts, bolts, and screws to ensure they are tightened. Second, the running belt and running board may need lubrication. Lubricate the running belt and running board.
How to fix an unstable base on Sunny Health & Fitness Treadmill?
If the base of your Sunny Health & Fitness Treadmill is unstable, it could be due to a couple of reasons. First, check for any objects under the main frame and remove them, also ensure the treadmill is on level ground. Second, the lock knob might be loose; try tightening it.
What to do if the Sunny Health & Fitness SF-T1407M Treadmill computer screen is not displaying clearly?
If the computer screen on your Sunny Health & Fitness Treadmill isn't displaying clearly, the batteries may be low. Replace them with new batteries.
General| Type | Manual Treadmill |
|---|---|
| Weight Capacity | 220 lbs |
| Display | LCD Display |
| Incline | Fixed |
| Foldable | Yes |
| Heart Rate Monitoring | No |
| Folded Dimensions | 50H inches |
| Speed | Dependent on user's pace |
Attaches upright supports to the main frame using washers and bolts.
Secures upright supports to the base frame using carriage bolts, washers, and nuts.
Provides instructions on adjusting and centering the treadmill's running belt.
To Next Page