Page 20 of 23
Maintenance and Cleaning
● Normal Cleaning
Board: Dust regularly with a slightly damp, soft, lint-free cloth. Wipe dry with a dry, soft
cloth in the direction of the wood grain. Spills should be immediately wiped up with a
damp cloth.
Glass: Clean the surface with a soft cloth soaked in lemonade and vinegar, then dry it
with napkins, and finally polish it with a piece of old newspaper. Or simply use products
specifically designed for glass.
Leather: Apply maintenance agent to the clean surface before use. Vacuum or dust fre-
quently with a clean, dry cloth. If leather is soiled, it can be wiped with a soft, damp cloth
using a lather of any mild soap with lukewarm water. Do not spot clean leather; clean the
entire surface. Wipe clean with a damp cloth and dry with a clean, soft cloth.
Fabric: Apply maintenance agent to the clean surface before use. Vacuum fabric as
needed, using an upholstery attachment. Do not brush fabric or use a vacuum attach-
ment with a rotary brush. Brushing may permanently damage the nap or change the
character of the fabric. Do not apply water or any liquid solution.
Aluminum: Clean with the special cleaner for aluminum.
Steel: Clean with the special cleaner for steel.
● Spot Cleaning
Water Stain: Will disappear over time. If it still exists after a month, wipe it with a clean
cotton cloth dipped withsome salad oil along the direction of the natural grain.
To Next Page
Loading...
