Page 22 of 23
Simple Trouble Removal
Trouble Reason Solution
Screws are loose.
Overloaded or lack of lube.
The metal connector is loose.
Tighten the screw.
Reduce the load and add
some lube to the rail.
Even the furniture or adjust the
hinge and add some lube.
Tighten the connector.
Cover the white place with a wet
towel until the color is back to normal.
Apply wax on edge of the
drawer and rails.
Cover the surface with fabric, and
smooth the edge with an iron.
Find out the cause and fix the
snap ring.
Resulted from the effect of
illumination.
The furniture is not evenly placed
or the hinge is not well adjusted.
Resulted from collision or
adhesive failure.
Not well-fixed or the snap ring
loses elasticity.
Resulted from high temperature.
The hinge is loose.
The surface is whitened.
The connection is loose.
Drawers are expanded.
The edge band turns up.
Skirting board falls down.
The door can't be open
smoothly.
The drawer can't be open
smoothly.
To Next Page
Loading...
