Sunpak Folding Vlogging Kit - Setting Up the Vlogging Kit; Initial Ring Light Assembly

1. Your kit comes
retracted so that it’s
only 2.76” high for
easy transport. In
order to set up your
unit, first lift the ring
light out of the base.
Loosen the Ring
Light Lock Knob to
allow the light to
swivel.
2. As you are extracting
the ring light from the
base, bring the center
column to a vertical
position.
3. Once vertical, tighten the
Ring Light Lock Knob, so that it
is secure prior to mounting your
smartphone or camera to the
ring light.
Ring Light
Lock Knob