4. Loosen the Extendable Column
Locking Collar at the bottom of the
column by rotating it counter-clockwise
to allow you to slide the Extendable
Column toward the center of the base.
5. When the Extendable Column is at
the center of the unit, tighten the lock-
ing collar by rotating it clockwise to
lock it in place.
6. While holding the base, pull up on
the top of the column (the base of
the ring light) to raise the ring light to
your desired height.
You may encounter some resistance
when pulling it up. This is a normal
function of the column in order to
keep it from self-collapsing.
Extendable Column
Locking Collar
To Next Page
Loading...
