SunPower SPR-210-WHT-U - User Manual

Safety and Installation Instructions
for United States and Canada
This document applies to the following SunPower Modules:
72 Cell Models:
SPR-220-WHT-U, SPR-210-WHT-U, SPR-200-WHT-U,
SPR-215-BLK-U, SPR-205-BLK-U
SunPower Corporation
www.sunpowercorp.com
Document 001-14158 Rev **

Summary

Introduction and Disclaimers

Disclaimer of Liability

States SunPower is not liable for installation, handling, or use.

Underwriters Laboratories (UL) Listing

Details UL1703 compliance and mounting requirements for listing.

Limited Warranty Information

Refers to SunPower warranty certificates for module limited warranties.

Safety Precautions

Electrical Characteristics and Connections

Electrical Characteristics at STC

Module electrical ratings measured under Standard Test Conditions (STC).

Fire Rating

States the module has a Class C fire rating.

Equipment Grounding

Describes methods for grounding the module frame to avoid electrical shock.

System Grounding

Mandates positive polarity connection to ground for optimal performance.

Series and Parallel Connection

Explains how to connect modules in series or parallel for desired output.

Module Mounting

Site Considerations

Requirements for mounting locations including temperature, design strength, and environment.

Mounting Configurations

Details methods for physically attaching modules to structures.

Module Maintenance

SunPower SPR-210-WHT-U Specifications

General

Brand	SunPower
Model	SPR-210-WHT-U
Category	Inverter
Language	English