SunPower
Installation Guide SPR50-80m-IUS102630 5
Other symbols
In addition to the safety and hazard symbols described on the previous pages, the following symbol
is also used in this Installation Guide:
Markings on this product
The following symbols are used as markings on this product with the following meanings.
This symbol accompanies notes that call attention to supplementary information that you
should know and use to ensure optimal operation of the system.
Warning regarding dangerous voltage
The product works with high voltages. All work on the product may only be done as
described in its documentation.
Beware of hot surface
The product can become hot during operation. Do not touch the product during
operation.
Observe the operating instructions
Read the product’s documentation before working on it. Follow all safety precautions
and instructions as described in the documentation.
AC current
DC current
Earth Ground
This inverter is evaluated to UL 1741, which includes assessment to all of the
requirements of IEEE1547 and IEEE1547.1, which are an outgrowth and further
development of the IEEE recommended practices and guidelines contained in IEEE
Std.929-2000. IEEE 929-2000 provides recommendations regarding the proper
equipment and functionality necessary to ensure compatible operation when power
generation is connected to the utility grid.
To Next Page
Loading...
