What to do if one or more lamps fail to light in Sunquest SQ 1000S?
If one or more lamps in your Sunquest Tanning Beds fail to light, verify that each lamp is correctly installed. Try switching the unlit lamp with one that is working. If the replacement lights up and the original still doesn't, replace the old lamp. If replacing the lamp does not solve the problem, contact your service representative.
Why sunbed canopy does not stay lit in Sunquest Tanning Beds?
If the canopy of your Sunquest Tanning Beds does not stay lit, check the AC power source and reset the circuit breaker or replace the fuse if necessary. Also, check the timer system per maintenance instructions. Contact your local service representative.
Details what structural defects and parts are covered by the warranty for the tanning unit.
Explains the process to get warranty service, including contacting the place of purchase and freight charges.
Outlines additional warranty terms, including purchaser limitations and legal rights.
Guides the user on how to unpack the sun canopy and inspect it for any damage upon arrival.
Details essential considerations before assembly, including electrical requirements and room ventilation.
Provides instructions on how to safely move and handle the sun canopy during transport.
Lists important precautions and advice to follow before using the sun canopy for tanning.
Provides a table of recommended tanning exposure times based on skin type and session number.
Step-by-step instructions on how to operate the sun canopy safely and effectively.
Instructions for cleaning the interior of the sun canopy to maintain tanning effectiveness.
Details the process for removing and installing new tanning lamps, including certified lamp types.
Explains how to check the accuracy and operation of the sun canopy's timer system.
General| Brand | Sunquest |
|---|---|
| Model | SQ 1000S |
| Category | Tanning Beds |
| Language | English |
To Next Page
