EasyManua.ls Logo

Sunquest Pro 14SE - User Manual

Sunquest Pro 14SE
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
A SSEMBLY A ND U SER G UIDE
MODEL PRO 14SE
21162A
¨

Questions and Answers

  • M
    Mr. Zachary SandersAug 4, 2025
    How to fix Sunquest Pro 14SE when lamps fail to light?
    • T
      Tammy RiceAug 4, 2025
      If your Sunquest Tanning Beds lamps fail to light, first ensure the unit is properly plugged into an outlet. Then, check the AC power source, resetting the circuit breaker or replacing the fuse if needed. Also, verify that the cord connecting the canopy and bench is securely connected. Finally, make sure the timer dial is turned past 0.
  • R
    Regina AdamsAug 10, 2025
    What to do if Sunquest Tanning Beds does not stay lit?
    • S
      Samantha BlackAug 11, 2025
      If your Sunquest Tanning Beds does not stay lit, check the AC power source and reset the circuit breaker or replace the fuse if necessary. You may also need to check the timer system, following the maintenance instructions.
  • E
    Erin LeeAug 19, 2025
    Why one or more lamps fail to light in Sunquest Pro 14SE Tanning Beds?
    • O
      ortegajosephAug 19, 2025
      If one or more lamps in your Sunquest Tanning Beds fail to light, first, check that the lamp is installed correctly. If it is, try switching the unlit lamp with one that is working. If the problem remains with the original lamp, replace it.
  • T
    Thomas FosterAug 26, 2025
    How to fix Sunquest Tanning Beds canopy that fails to stay in position?
    • T
      Tina HullAug 26, 2025
      If the canopy of your Sunquest Tanning Beds fails to stay in the up or down position, it indicates that the gas springs need replacement. Replace the gas springs when they no longer provide enough support to lift the canopy.

Summary

Lifetime Warranty

What Is Covered?

Details structural defects and parts covered for lifetime and 6 months, excluding acrylics, lamps, and starters.

How to Obtain Service

Explains warranty service must be by authorized personnel, requiring proof of purchase and user covering freight charges.

Safety Information

DANGER - Ultraviolet Radiation

Warns about UV radiation dangers including skin injury, premature aging, and eye damage from overexposure.

Warning - Product Usage

Instructs to read booklet, wear protective eyewear, and disconnect power before maintenance.

Installation

Unpacking and Inspection

Details how to unpack sunbed components and inspect them for any visible shipping damage.

Tools Required

Lists the necessary tools for sunbed assembly: utility knife, adjustable wrench, and allen wrench.

Pre-Installation Planning

Covers electrical requirements, ventilation, ambient temperature, placement, and assembly personnel.

Operation

Troubleshooting

Problem;Solution Chart

Presents common problems like lamps not lighting and solutions, including checks and contacting service.

Obtaining Service

Sunquest Pro 14SE Specifications

General IconGeneral
BrandSunquest
ModelPro 14SE
CategoryTanning Beds
LanguageEnglish

Related product manuals