To Next PageTo Next Page
Need help?Do you have a question about the Sunrain YT-200TB1 and is the answer not in the manual?
Details model specifications including weight and dimensions.
Shows a visual representation of the product's exterior.
Illustrates the water pipe connections for the heat pump.
Provides guidelines for connecting water pipes and necessary precautions.
Details electrical requirements, wire gauge, and switch ratings.
Explains the importance and setup of leakage protection devices.
Steps for filling the unit with water before initial operation.
Instructions for connecting the unit to power and initial screen display.
Procedure for draining water before cleaning or moving the unit.
Lists operating conditions and main functions of the control system.
Explains the meaning of symbols and their status on the controller display.
How to switch the heat pump on and off using the controller.
How to select between manual and automatic temperature control modes.
Procedure for setting the desired water temperature in manual or auto mode.
How the unit controls water temperature in heating and cooling modes.
How the electric heater is activated based on water temperature.
Controls for the circulating pump and antifreeze mode.
Specific controls for circulation pump in fluorine cycle models.
Manually activating the sterilization mode for the electric heater.
Automatic activation of sterilization based on time and temperature.
Describes the low-pressure fault, its code, and recovery.
Describes the high-pressure failure, its code, and recovery.
Describes the high exhaust temperature fault and compressor stop.
Regular maintenance tasks to ensure optimal performance and longevity.
General| Model | YT-200TB1 |
|---|---|
| Category | Water Heater |
| Brand | Sunrain |
| Type | Solar Water Heater |
| Capacity | 200L |
| Solar Collector Type | Vacuum Tube |
| Number of Tubes | 20 |
| Working Pressure | 0.6 MPa |
| Tank Material | Stainless Steel |
| Insulation Material | Polyurethane Foam |
