Need help?Do you have a question about the Sunrise IW-60H and is the answer not in the manual?
General| Brand | Sunrise |
|---|---|
| Model | IW-60H |
| Category | Industrial Equipment |
| Language | English |
Lists recommended grease types for machine lubrication.
Lists standard accessories and tools provided with the machine.
Procedure for adjusting the central slide mechanism for proper alignment.
Steps to adjust the punch ram alignment and prevent swiveling.
Details standard tools and tables for the punching station.
Explains how to align the punch and die for correct operation.
Guide on setting the correct clearance between punch and die based on material.
Instructions for adjusting the stripper height and alignment.
Method to calculate the required force for punching operations.
Safety and operational precautions for punching.
Lists recommended lubricants for punches and dies.
Step-by-step guide for performing punching operations on different materials.
Describes the upper and lower blades used for flat bar shearing.
Details how to adjust the cutting clearance for flat bar shearing.
Safety and operational precautions for flat bar shearing.
Step-by-step guide for shearing flat bars.
Instructions for shearing angle flanges.
Describes the blades used for angle shearing.
Details how to adjust the cutting clearance for angle shearing.
Guide for performing 90-degree shearing on angles.
Instructions for 45-degree internal miter shearing on specific models.
Instructions for 45-degree miter shearing on the IW-60H model.
Details how to adjust the cutting clearance for bar shearing.
Safety and operational precautions for bar shearing.
Step-by-step guide for shearing square and round bars.
Describes the blades used for the notching station.
Instructions for adjusting the notching bolster for blade alignment.
Step-by-step guide for performing notching operations.
Pre-operation checks for safety and condition.
Procedure and schedule for changing hydraulic oil.
Guidelines for checking and maintaining hydraulic oil level and temperature.
Information on hydraulic pressure settings and adjustments.
Common causes and solutions for motor start and movement problems.
Troubleshooting for issues like lack of capacity or excessive hydraulic noise.
To Next Page
