SECTION 9 -
FURNITURE AND SOFTGOODS
9-16
3. Fasten the safety belt.
Manual Retraction of Loft Bed
If the Power Loft Bed is malfunctioning you
may need to manually retract the loft bed.
1. Remove screws from bunk panel above
passenger seat to access loft bed motor.
2. Remove panel and set aside.
3. Remove Loft Bed manual retractor from
InfoCase.
4. Insert manual retractor into loft bed motor (as
shown) and turn clockwise to raise the loft bed
into stored position.
5. Turn the key (located on the right sidewall
behind the passenger seat) to the “OFF”
position.
6. Fasten the safety belt.
To Next Page
Loading...