68
■ ANGLE
Designs can be rotated from 0 to 359 degrees. The default is 0 degrees.
■ MIRROR
Designs can be reversed on the X axis, the Y axis or both
Mirror of the design on the X-axis
0 degrees 90 degrees
TIP
Changing the stitching angle of a design to 90 degrees can be a real benefit when
embroidering on left front (chest) jackets, especially those satin jackets with flannel
linings. By hooping the design sideways, you take advantage of the natural stability of
the shoulder seam. When you place it on the machine, the jackets lining, sleeves, etc.
fall out of the way. Rotate the design 90 degrees and stitch with ease.
To Next Page
Loading...
