54
EXPLANATION OF FUNCTION MENU
INPUT AND OUTPUT OF DESIGN
When the machine is turned on and the operating system loads, press
The following screen will appear:
1. EMB CALL
2. FDD CALL
3. EXTERNAL INPUT
4. EXTERNAL OUTPUT
The sub-menu functions for design input and output are:
1. EMB CALL: Calls the design from memory.
2. FDD CALL: Reads design from the disk in the floppy drive.
3. EXTERNAL INPUT: Reads designs from an outside source.
4. EXTERNAL OUTPUT: Outputs designs from memory.
5. DESIGN DELETE: Deletes design stored in memory.
6. DESIGN COPY: Copies designs stored in memory.
7. MEMORY INITIAL: Deletes all designs stored in the memory.
To Next Page
Loading...
Need help?
General
