EasyManua.ls Logo

SUNSTONE ruby series - Grill Installation Guide; Cut-Out Dimensions and Island Requirements

SUNSTONE ruby series
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 9
LOCATING GRILL Grill Cut-Out Dimensions
Ruby Series Grill Island Cut-Out Dimensions
ITEM NO.
WIDTH
DEPTH
HEIGHT
RUBY3B LP/NG
28” Inch
21-3/4 Inch
9-3/4 Inch
RUBY4B LP/NG
34” Inch
21-3/4 Inch
9-3/4 Inch
RUBY4BIR LP/NG
34” Inch
21-3/4 Inch
9-3/4 Inch
RUBY5BIR LP/NG
40” Inch
21-3/4 Inch
9-3/4 Inch
Grill Cut-Out
Your grill is SELF-RIMMING, meaning the lip of grill rests on top of the counter edge around the cut-out
with the front of grill which is Free-Hanging from counter top. Because of this, there is No Need for any
Trim-Kit like with many other grill in the market.
1. Maintain 24” Clearance from any Combustible Materials in ANY direction of Grill.
2. If any combustible materials within 24” distance, must have Heat Barrier like Grill Jacket, or other
Non-Combustible type like Bricks, Hardy Board, Metal.
3. Orient the grill so the Prevailing winds are not blowing into the rear or side of grill.

Related product manuals