Easy Service Access
Your grill is specially designed for easy Self-Service, similar to opening the hood of your car – the grill’s
control panel opens 90 degree’s open revealing all inside valves and wires.
1. Open Hood, and remove All Cooking Grates
so only the Flavorizer Grids remain.
2. Locate and Remove the Screws shown in
picture to right.
3. Pull Grill away from island 1 to 2 inches
4. Remove the Knobs, & Drip-Pan
5. Lift Up on Control Panel, gripping the top
sides on panel, lift upwards so the notch
panel is fitted into is released.
6. Open Control Panel 90 degree, revealing all
inside components for easy access.
To Next Page
Loading...