EasyManuals Logo

SunSynk SUN-BATT-5.12 Product Description

SunSynk SUN-BATT-5.12
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
Page | 4Hybrid Inverter | Installer Manual
Operating current derating according to cell voltage and battery temperature.
1. Test conditions: 100% depth of discharge (DoD), 0.2C rate charge & discharge
at 25ºC;
2. Charge/discharge derating occurs when the operating temperature from -10ºC
to 5 ºC & 45ºC to 55ºC.
3. Condition apply. Refer to SUN-BATT-5.12 Warranty Letter
General Specification
Dimension( W×D×H mm ) 450×150×533mm
Weight (Kg) 47kg
Installation Floor stand or Wall mounted
Working Temperature2 -20ºC ~ 60ºC
Storage Temperature
≤25ºC, 12 months
≤35ºC, 6 months
≤45ºC, 3 months
Operating / Storage / humidity ≤ 95%RH
Max Operating Altitude ≤2000m
IP Rating IP20
Cell Technology LiFePO
4
, Lithium Iron Phosphate
Cycle life3
6000 Cycles @ 80% DOD / 25ºC / 0.5C,
60% EOL
Scalability Max 8 batteries in parallel
Standard Compliance
Certification
UN38.3, IEC62619, IEC62040-1
(more available upon request)
Ordering and Deliverable Part
Product ordering part
SUN-BATT-5.12 battery
SUN-BATT-5.12 parallel cable
SUN-BATT-5.12 to PCS cable

Other manuals for SunSynk SUN-BATT-5.12

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SunSynk SUN-BATT-5.12 and is the answer not in the manual?

SunSynk SUN-BATT-5.12 Specifications

General IconGeneral
BrandSunSynk
ModelSUN-BATT-5.12
CategoryCamera Accessories
LanguageEnglish

Related product manuals