SUN-BATT-5.12R | User Manual10
3. INSTALLATION GUIDE
3.1. Checking Before Installation
3.1.1. Checking Outer Packing Materials
Packing materials and components may be damaged during transportation. Therefore, check the outer pack-
ing materials before installing the battery. Checking the surface of packing materials for damage, such as holes
and cracks. If any damage is found, do not unpack the battery and contact the dealer as soon as possible. You
are advised to remove the packing materials within 24 hours before installing the battery.
3.2. Checking Deliverables
After unpacking the battery, check whether deliverables are intact and complete. If any damage is found or any
component is missed, contact the dealer.
The below table shows the components and mechanical parts that should be delivered.
To Next Page
Loading...
Need help?
General
