Suntec Wellness CLIMATRONIC IMPULS 2.6 Eco R290 APP User Manual (English)

Questions and Answers:

M
Mr. Jeffrey MitchellAug 5, 2025
Why is my Suntec Wellness CLIMATRONIC IMPULS 2.6 Eco R290 APP not cool enough?
- C
  Chad CuevasAug 6, 2025
  If your Suntec Wellness Air Conditioner isn't cooling effectively, there might be several reasons: * Ensure all doors and windows are closed. * Eliminate any heat sources from the room if possible. * Check that the exhaust hose is correctly installed and free from blockages. Clean it if necessary. * Adjust the set temperature to a lower setting. * Make sure the air inlet is not blocked; clean it if it is.
D
Deanna WilliamsAug 10, 2025
Why won't my Suntec Wellness CLIMATRONIC IMPULS 2.6 Eco R290 APP Air Conditioner turn on?
- C
  Christina MccallAug 10, 2025
  If your Suntec Wellness Air Conditioner doesn't start when you press the power button, it could be due to several reasons: * The water tank might be full. If the Waterfull indicator is on, empty the water tank. * If you're in cooling mode, the room temperature might be lower than the set temperature. Try resetting the temperature. * The ambient temperature might be too low or too high. This unit is recommended for operation at 17-35°C. * In dehumidification mode, the ambient temperature might be too low. It needs to be higher than 17°C.
C
Cathy JacksonAug 15, 2025
Why is my Suntec Wellness CLIMATRONIC IMPULS 2.6 Eco R290 APP so loud?
- T
  Tammy BrownAug 15, 2025
  If your Suntec Wellness Air Conditioner is making excessive noise, consider these points: * Ensure the unit is placed on an even and flat surface. * Note that some noise from the refrigerant flowing inside is normal.
C
carol40Aug 20, 2025
What to do if the compressor of my Suntec Wellness Air Conditioner does not start?
- J
  Joseph DavisAug 20, 2025
  If the compressor of your Suntec Wellness Air Conditioner isn't starting, the thermal protection function may be activated. Turn off the device and restart it after 3 minutes.
C
Courtney HallAug 26, 2025
What does E2 code mean on my Suntec Wellness Air Conditioner?
- E
  Eric HorneAug 26, 2025
  If your Suntec Wellness Air Conditioner displays an 'E2' error code, it indicates that the room temperature sensor is not functioning and needs to be replaced.
R
Robert ArmstrongAug 30, 2025
What does E1 code mean on my Suntec Wellness Air Conditioner?
- M
  Mark ThomasAug 30, 2025
  If your Suntec Wellness Air Conditioner displays an 'E1' error code, it means the hose temperature sensor is not working and needs to be replaced.