What to do if Suntec Wellness KLIMATRONIC DryFix 20 Design doesn't work?
First, ensure the Suntec Wellness Dehumidifier is properly plugged into a working electrical outlet. If it is plugged in, check the "tank full" indicator. If this indicator is lit, it means the water tank is either full or not correctly positioned. Empty the water tank and make sure it is properly placed back into the dehumidifier.
Why is my Suntec Wellness Dehumidifier not dehumidifying?
Your Suntec Wellness Dehumidifier might not be dehumidifying because either the air inlet or outlet is blocked. Inspect both and remove any obstructions. Also, the ambient temperature or relative humidity might be too low; check the settings to ensure they are appropriate for your environment.
How to fix loud noises during start up of Suntec Wellness Dehumidifier?
If your Suntec Wellness Dehumidifier makes loud noises when starting, first ensure that the device is placed on a stable, flat surface. Also, a dirty air filter can cause loud noises. Clean the air filter as described in the manual.
What to do if air does not flow out of Suntec Wellness KLIMATRONIC DryFix 20 Design Dehumidifier?
If air isn't flowing out of your Suntec Wellness Dehumidifier, the air filter might be dirty. Clean the air filter as described in the manual. Also, the internal drying function might be activated. If so, wait until the process is finished.
Why does hot air come from the air outlet of my Suntec Wellness KLIMATRONIC DryFix 20 Design?
The Suntec Wellness Dehumidifier does not have a cooling function. The air exits from the condenser, and this is normal operation, not a defect.
General| Model | KLIMATRONIC DryFix 20 Design |
|---|---|
| Type | Dehumidifier |
| Weight | 14 kg |
| Dehumidification Capacity | 20 liters per day |
| Features | Continuous drainage |
| Operating Temperature | 5°C - 32°C |
Identification of device parts visible from the front.
Identification of device parts visible from the rear.
Overview of the control panel, buttons, and their functions.
Explanation of the icons and symbols displayed on the screen.
Step-by-step guide to turn on the dehumidifier.
Instructions for setting the automatic on/off timer.
How to use the automatic dehumidification mode for optimal humidity.
Guide for operating the unit in high dehumidification mode.
Guide for operating the unit in low dehumidification mode.
Instructions for activating and using the air purification feature.
Explanation of the internal drying function to prevent moisture and mold.
Procedure for emptying the water tank when it is full.
Instructions for setting up continuous water drainage via hose.
To Next Page
