How can I increase the efficiency of the
PROGRESS unit?
External circumstances exist which may impact
the efficiency of the PROGRESS unit. Room
insulation, use of wall/window adapter, ratio of
window space (solar radiation), operation of
electrical units in the room (EDP), presence of
several persons in the room. You can increase
the efficiency of the PROGRESS unit
accordingly by adjusting such circumstances.
Compressor does not activate
Depending on ambient temperatures and
PROGRESS unit type it may take approx. 10
minutes after starting the compressor until the
cooling capacity is reached.
PROGRESS unit deactivates.
On reaching the set required temperature, the
PROGRESS unit switches off automatically.
Check manual setting of the required
temperature as well as the TIMER setting.
How is the m² or m³ data of the manufacturer
calculated
The m² or m³ data of the manufacturer for the
various PROGRESS units are average values
related to a room height of 2.5 metres. It must be
considered that such data can be clearly
underscored or exceeded under certain
circumstances. Circumstances which work
against efficiency of the PROGRESS units
include e.g. bad insulation of the building, large
window areas, south facing, attic apartment,
many additional heat sources, such as e.g.
number of persons, EDP, light, kitchen units,
washing units etc.
PROGRESS unit does not cool correctly
You achieve the most effective and economical
cooling comfort if you already cool the room to
be cooled when the room temperature is not yet
heated up. Air conditioners operate more
effectively if the temperature is to be maintained.
To drastically cool the air and inventory in a fully
heated room requires much more time and
energy.
To Next Page
Loading...
