SUNVILLA Lago Brisa User Manual

Page 1 of 13
Made in China
PREPARATION
Before beginning assembly of this product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any parts are missing or damaged, do not
attempt to assemble this product. Stop and call our customer service center at 1-888-690-9800.
INFORMATION SAFETY
Please read and understand this entire manual before attempting to assemble or install the product.
This outdoor furniture is designed and made for personal non-commercial use. It should not be
used as a toy or tool. Children should not engage in the assembly, removal, or disassembly of the
product.
ASSEMBLY / CARE & USE INSTRUCTIONS
IMPORTANT, RETAIN FOR FUTURE REFERENCE:
READ CAREFULLY
Rectangular Fire Pit Dining Table
Lago Brisa 7 Piece Fire Pit Set
If you have any questions or any missing parts pertaining to the assembly of this product, before
returning it to your retailer, please contact our customer service department at 1-888-690-9800 or
email CS@SUNVILLAHOME.COM, 5:00 a.m. - 5:00 p.m. PST / 8:00 a.m. - 8:00 p.m. EST,
Monday - Friday.

SUNVILLA Lago Brisa Specifications

General

Brand	SUNVILLA
Model	Lago Brisa
Category	Outdoor Fireplace
Language	English

Summary

Product Overview and Support

Product Identification and Contact

Identifies the product and provides customer service contact details.

Preparation and Safety Introduction

Outlines preparation steps and introduces safety information.

Parts and Hardware

Component List

Lists all physical parts included in the package.

Hardware and Tool List

Lists all necessary hardware, bolts, washers, and tools.

Assembly Steps 1-2

Step 1: Assemble Table Base and Top

Connects the fire pit table top (A) and base (B) using bolts (AA).

Step 2: Install Battery and Glass

Installs the AAA battery and spreads decorative glass (F) over the burner.

Assembly Steps 3-4

Step 3: Connect Propane Tank

Connects the regulator (E) to the LP propane tank (D).

Step 4: Ignite Fire Pit

Opens the propane tank valve and ignites the fire pit using the ignition button.

Assembly Steps 5-6

Step 5: Close Valve and Cover

Closes the propane tank valve and places the cover (C) over the burner.

Step 6: Indoor Storage Guidelines

Provides guidelines for indoor storage of the fire pit table.

Critical Safety Warnings

General Cautions and Gas Leak Protocol

Covers manual retention, gas smell procedures, and flammable liquid storage.

Operational and Environmental Hazards

Details risks from hot surfaces, children, and carbon monoxide.

Installation and Components

Design and Installation Considerations

Guidance on placement in an outdoor, well-ventilated location.

Inspect Appliance and Components

Instructions for inspecting parts for damage before and during installation.

Appliance Specifications

Appliance Certification Details

Information on certification standards and testing.

BTU Specs and Orifice Sizing

Technical specifications including BTU output and orifice sizes for different gas types.

Gas Hookup and Pressure

Gas Pressure Requirements

Details on required input pressures for natural gas and propane.

Gas Connection and Leak Check

Steps for connecting gas supply and verifying connections for leaks.

Lighting and Operation

Pre-Lighting Safety Checks

Emphasizes smelling for gas and avoiding ignition sources before lighting.

Lighting and Extinguishing Guide

Step-by-step instructions for lighting, operating, and turning off the fire pit.

Troubleshooting Guide

Common Fire Pit Issues and Solutions

Addresses problems like the fire not lighting or flames being too low.

Maintenance and Service

Maintenance Inspection Tasks

Lists tasks for inspecting the burner assembly, ignition, and gas hose.