Sunvision Scientific PRO 28LX

Questions and Answers

M
Morgan ClaytonAug 9, 2025
What to do if lamps fail to light on Sunvision Scientific PRO 28LX Grill?
- A
  Ariel FisherAug 9, 2025
  If your Sunvision Scientific Grill's lamps fail to light, here are a few things you can try: 1. Verify the AC power source. If needed, reset the circuit breaker or replace the fuse. 2. Ensure the unit is properly plugged into the outlet. 3. Check that the cord connecting the canopy and bench is securely connected. 4. Confirm that the timer dial is set to a value greater than 0.
C
Christopher WilliamsAug 16, 2025
Why my Sunvision Scientific Grill does not stay lit?
- C
  Christopher HuffmanAug 16, 2025
  If your Sunvision Scientific Grill does not stay lit, here are a few things you can try: 1. Check the AC power source and reset the circuit breaker or replace the fuse if necessary. 2. Check timer system per maintenance instructions in this guide. Contact your local service representative.
C
Christopher GrayAug 23, 2025
What to do if one or more lamps fail to light on Sunvision Scientific Grill?
- J
  Jodi WilsonAug 23, 2025
  If one or more lamps on your Sunvision Scientific Grill fail to light, follow these steps: 1. Ensure the lamp is correctly installed. 2. Swap the non-lighting lamp with one that is working. If the new lamp lights up and the old one still doesn't, replace the old lamp. 3. If replacing the lamp doesn't solve the issue, contact your service representative.
G
ginamontgomeryAug 30, 2025
How to fix Sunvision Scientific PRO 28LX canopy that fails to stay in position?
- A
  Arthur RamirezAug 31, 2025
  If the canopy of your Sunvision Scientific Grill fails to stay in the up or down position, replace the gas springs when they no longer have sufficient power to aid in lifting the canopy.