SUNWARD SWL3220 - User Manual

Questions and Answers

C
Carla PorterAug 21, 2025
Why does the oil pressure light stay on in my SUNWARD Compact Loader even at high speed?
- L
  Lisa DavidsonAug 21, 2025
  If the oil pressure warming light stays on even when the SUNWARD Compact Loader engine is running at high speed, it could be due to several reasons. The oil level might be too low, requiring a refill. Alternatively, the oil filter could be clogged, necessitating a filter change. Lastly, the oil might not be suitable for the current ambient environment, which would require changing the oil to a more appropriate type.
Y
Yvonne ReyesSep 3, 2025
Why are the pumps on my SUNWARD Compact Loader making abnormal noises?
- E
  Elizabeth Mann DDSSep 3, 2025
  If your SUNWARD Compact Loader's pumps are emitting abnormal noise, there are several possible causes. First, check if there is enough oil in the tank and refill if necessary. Second, the pump itself may be faulty, requiring a check, repair, or replacement. Third, the hydraulic oil may be unsuitable for the current temperature, in which case you should change the oil.
H
harry21Sep 1, 2025
Why does the starter pinion engage and disengage on my SUNWARD SWL3220?
- C
  Christopher SharpSep 1, 2025
  If the starter pinion engages and disengages while starting the engine on your SUNWARD Compact Loader, it's likely due to insufficient battery charge. You should charge the battery.
M
Melissa BoothAug 30, 2025
Why is the traction force insufficient on my SUNWARD SWL3220 Compact Loader?
- R
  Robert ShannonAug 31, 2025
  If the traction force in both travel directions is insufficient on your SUNWARD Compact Loader, it could be due to several reasons. The endothermic engine might not be reaching its maximum speed, requiring you to change the diesel oil filter and check the injection pump. The auxiliary fuel pump (gear pump) could be faulty and needs repair or replacement. The maximum pressure valve setting might be incorrect and needs to be reset. A faulty connection to the servo control or an incorrect lever angle should be restored or the shift lever moved to the correct position. Finally, the pressure relief valve setting might be incorrect and needs to be reset.
J
jennalarsonAug 29, 2025
Why won't the charge warming light go off on my SUNWARD Compact Loader?
- B
  Brenda DonaldsonAug 29, 2025
  If the charge warming light on your SUNWARD Compact Loader does not go out when the engine is running, even at high speed, it could be due to a faulty alternator, which would need to be replaced. Alternatively, it may be due to faulty cables, which should be checked and repaired.
S
Stephen HuffAug 27, 2025
What to do if the starter doesn't work on my SUNWARD SWL3220?
- K
  Kelly LeAug 27, 2025
  If the starter on your SUNWARD Compact Loader doesn't work when you turn the key to the START position, there are a few potential causes. It could be due to faulty cables, so check and repair them. The battery charge might be insufficient, requiring you to charge the battery. Alternatively, the main fuse could be faulty and needs to be replaced.
R
Rickey RobertsAug 27, 2025
How to fix lamps that don't work properly on SUNWARD SWL3220?
- B
  Bethany WilsonAug 27, 2025
  If the lamps on your SUNWARD Compact Loader aren't working correctly even when the engine is running at high speed, it could be due to faulty cables or faulty fan belt tension. Check and repair any loose terminals and connections. Also, inspect the belt tension and adjust it, or replace it if necessary.
E
Eric JuarezAug 25, 2025
Why my SUNWARD Compact Loader does not reach maximum speed?
- B
  Brett BrownAug 25, 2025
  If your SUNWARD Compact Loader isn't reaching its maximum speed, several factors could be at play. The suction filter might be clogged, requiring a change. The endothermic engine itself might not be reaching its maximum speed, suggesting you change the diesel oil filter and check the injection pump. The auxiliary pump (gear pump) could be faulty, necessitating a check, repair, or change. Insufficient pilot pressure needs to be set. Finally, the pressure relief valve setting might be incorrect and should be set to the rated value.
B
Barbara SmithAug 22, 2025
What to do if my SUNWARD SWL3220 Compact Loader is overheating and steam comes out of the radiator?
- J
  Jennifer HutchinsonAug 23, 2025
  If steam is coming out of the radiator breather and the engine coolant temperature indicator is reaching the overheating range in your SUNWARD Compact Loader, it could be due to several reasons. You may need to refill the coolant fluid if the level is low, or repair the radiator if there's a leak. Check the fan belt tension and adjust it if it's slacked. Mud or limestone accumulation in the cooling system requires changing the coolant and cleaning the system. Damaged or closed radiator fins should be repaired or cleaned. A faulty thermostat needs to be replaced, and a loose or broken radiator cap should be tightened or replaced. Operating at too high an altitude can also cause overheating.