SUPAIR | EVO Lite | page 18
Push the cord with the loop through grom-
met #3, and push the handle’s pin through
the loop. Then tuck away the pin with the
handle’s end behind the neoprene flap #3.
Push the cord with the loop through grom-
met #7, and push the handle’s pin through
the loop.
With a small cord: hook the loop #4 marker. Push the cord and the loop through grom-
met #5.
Push the cord and the loop through grom-
met #6.
Then tuck away the pin with the handle’s
end behind the neoprene flap #7.
To Next Page
Loading...
