EasyManua.ls Logo

SUPAIR STRIKE 2 - User Manual

SUPAIR STRIKE 2
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SUPAIR SAS
PARC ALTAÏS
34 RUE ADRASTÉE
74650 ANNECY CHAVANOD
FRANCE
RCS 387956790
User’s manual
STRIKE 2
Revision index : V1 08/02/2021
English
Question and Answer IconNeed help?

Do you have a question about the SUPAIR STRIKE 2 and is the answer not in the manual?

Summary

Introduction

Technical Specifications

Size Choice

Nomenclature

Harness Overview

Accessories Assembly

Carabiners

Details on compatible carabiners and their connection to the harness.

Removable comfort plate

Instructions for installing and removing the comfort plate for sportier use.

Seat plate

Instructions for installing the seat plate with or without it for different flying sensations.

Bumpair

Instructions for installing the BUMPAIR shock absorber for impact protection.

Inflatable protection

Instructions for installing the inflatable protection system and routing its pipe.

Speed-bar system

Step-by-step guide for assembling and connecting the speed-bar system to the harness.

Installing the Reserve Parachute

Rescue parachute pocket characteristics

Details on the reserve parachute pocket size, flaps, and compatible parachute models.

Connecting the handle to the POD

Procedure for securely connecting the reserve parachute handle to the POD using a knot.

Riser;Harness connection

Instructions for connecting the risers to the harness attachment points using a Lark's head knot.

Place the risers inside the sleeve

Guide on correctly placing risers within the protective sleeve, ensuring they are not too stretched.

Reserve parachute;risers

Steps for connecting the reserve parachute to the risers using Maillon Rapide and toric rings.

Installing the reserve parachute in its container

Procedure for installing the reserve parachute into its container using loops and grommets.

Locking the reserve parachute handle

Procedure for locking the reserve parachute handle in place using a rod and hole.

Mandatory extraction test procedure

Procedure for checking the installation and function of the parachute during a hang-test.

Packing and Tips

Adjusting the Harness

The various adjustments

Overview of the different adjustment points on the harness for optimal fit and comfort.

Adjusting the chest strap

Guidance on adjusting the chest strap for stability and piloting efficiency.

Lumbar support

How to adjust the lumbar support for personalized lower back support and flight position.

Adjust the shoulder straps length using the trimmers

Tips for adjusting shoulder strap length for general comfort and torso support.

Speedbag adjustments

Instructions for adjusting the speedbag length using heel and toe straps for optimal leg position.

Connecting the Wing to the Harness

Connection wing - harness

Procedure for connecting the wing risers to the harness using self-locking carabiners.

Installing the accelerator

Steps for installing and connecting the accelerator to the wing and harness.

Flight Behavior

Flight Phases

Pre-Flight control

Essential checks to perform before taking off for a safe flight.

Take-off

Instructions for maintaining posture and safely launching the paraglider.

In flight

Description of the harness behavior and recommended adjustments while airborne.

Speedbar use

Guidance and warnings for using the speed-bar for increased flight speed.

Landing

Instructions and precautions for a safe and controlled paragliding landing.

Using the Reserve Parachute

Throwing the reserve parachute

Procedure for deploying the reserve parachute in an emergency situation.

TOWING

Information on equipment and procedures for taking off under tow.

MANDATORY CONTROLS

Details on essential biannual and annual inspections for safety and functionality.

Care

Harness cleaning and maintenance

Recommendations for cleaning, maintaining, and lubricating the harness and its components.

Storage and transport

Guidelines for storing and transporting the harness to protect it from damage and UV exposure.

Life span

Information on required inspections and recommended replacement intervals for harness components.

Repair

Procedure for sending the harness for inspection or repair at a professional facility.

Hardware & Parts

List of compatible hardware and spare parts with their reference numbers.

Materials

Details on the fabrics and webbings used in the construction of the harness.

Recycling

Instructions on how to dispose of the harness responsibly at the end of its life span.

Warranty

DISCLAIMER

Legal disclaimer regarding paragliding risks and user responsibility.

PILOTS GEAR

Recommendations for essential pilot protective gear and accessories for safe flying.

BUMPAIR Shock Absorber

In Case of an Incident

Service Book

SUPAIR STRIKE 2 Specifications

General IconGeneral
SensorOptical
Polling Rate1000 Hz
Buttons6
Cable Length1.8 m
ColorBlack
TypeMouse
GeometryErgonomic

Related product manuals