Harness User’s manual | STRIKE 2
SUPAIR | STRIKE 2 | page 16
1
- Place the risers inside their guiding/protec-
tive sleeve connected alongside the harness.
Risers mustn’t be too stretched.
- Bring them out through the reserve para-
chute container
2
- Use the Zip to close the sleeve until the left
shoulder strap
INSTALLING THE RESERVE PARACHUTE
Place the risers inside the sleeve
The harness is delivered with solo dyneema risers. The risers sleeve is designed to work only with this model.
To Next Page
Loading...
