SUPAIR STRIKE 2 - Riser;Harness connection

Harness User’s manual | STRIKE 2
SUPAIR | STRIKE 2 | page 15
A
We recommend the use of the risers supplied with the
harness to ensure optimal opening of the reserve.
1
2
3
INSTALLING THE RESERVE PARACHUTE
Riser/Harness connection
First, open the riser guiding sleeve all the way from top to bottom to access the reserve parachute connec-
tion loops. Once the riser guiding sleeve is fully opened, the zipper tab must be located on the same side of
the reserve parachute pocket.
>> Access to the reserve parachute connection points.
Attach each riser to the
shoulder attachment points by
making a Lark’s knot ( loop to
loop connection ). Use the larg-
est bridle loop ends.
Fastening the risers to the harness via a Lark’s head knot connection.
Assemble everything
correctly.
Make sure for the risers
not to be longer than one
another.
Tighten each connection securely.