SUPAIR STRIKE 2 - Bumpair; Inflatable protection

Harness User’s manual | STRIKE 2
SUPAIR | STRIKE 2 | page 11
The STRIKE 2 harness can be used with a BUMPAIR or an inflatable protection.
ACCESSORIES ASSEMBLY
Install the bumpair : Install the inflatable protection :
Compatibles Bumpair : BUMP STK 2 Compatibles protections: Protection gonflable Strike 2
1. Open the zip of the pocket located under the seat
2. Open the zip of the bumpair pocket
3. Insert the bumpair then close the 2 zips
1. Open the zip of the pocket located under the seat
2. Open the zip of the bumpair pocket
3. Insert the bumpair then close the 2 zips
4. Exit the pipe through the outlet on the shoulder
Réf. : PROBUMPSTK2 Réf. : PROGONF
Inflatable protectionBumpair