SUPAIR | EVO Lite | page 31
Pre-Flight control.
• Inspect the harness and the carabiners for possible wear and tear.
• Be certain for the handle cables to be securely fastened in place inside their respective reserve parachute pocket housings.
• Check that your personal settings have not changed.
• Check that all zippers and buckles are closed.
• Check that the speedbar/accelerator is correctly connected and adusted.
• Check that no rigging line or other object comes in contact and interferes with the rescue parachute handle.
• Make sure that the self-locking carabiners are locked and connected to the paraglider.
• Be certain for the accelerator/speed-bar line not to ride through the reserve parachute handle.
Takeoff
Flight phases
• Takeoff maintaining a vertical posture and push yourself inside the harness but only once away from the ridge.
Do not let go the brakes when close to the terrain.
After a thorough weather conditions analysis was conducted and the decision to fly was made, put your harness on and follow the next
steps:
• Fully close the leg straps, Safe-T-bar and chest strap buckles..
To Next Page
Loading...
