10
5. key
Press the UNIT key to select temperature units in ℉
or ℃
To select thermocouple type:
When SHIFT is enabled, press the TYPE key to select
K-type and J-type thermocouple.
6. key
Press the MODE key to alternate between
maximum/minimum measurement readout.
Hi/Lo key: The alarm Hi/Lo temperature setting
When the temperature is exceeds the Hi temperature
setting or goes lower than the Lo temperature setting,
the alarm will continue to sound.
Set Hi/Lo Limits: When SHIFT is enabled, press the
Hi/Lo key to enter the Hi/Lo temperature setting:
A. Use SHIFT key to select Hi or Lo setting.
B. Use MODE or HOLD key to change alarm
UNIT
MODE
To Next Page
Loading...