- 9 -
■ Calibration
Please contact SUPCO for calibration information,
if necessary.
■. Maintenance
1. CLEANING INSTRUCTIONS
The meter may be wiped down with a wet sponge or
cloth using a mild, water based detergent.
NOTE:
This unit is not designed for complete submersion or
washing in water.
2. BATTERY REPLACEMENT
Use the following procedure:
When the battery voltage drops below proper
operation range the symbol will appear on the
LCD display and the battery needs to be replaced.
∞
Press the battery cover towards the arrowhead to
open the battery cover.
To Next Page
Loading...
