Need help?Do you have a question about the Supco DAVM+ and is the answer not in the manual?
General| Continuity | Yes |
|---|---|
| Diode Test | Yes |
| Audible Continuity | Yes |
| Display | LCD |
| Power Supply | 9V Battery |
| Display Backlight | Yes |
| Type | Digital Anemometer |
| Measurement Range (Air Velocity) | 0.4 to 30 m/s |
| Accuracy (Air Velocity) | ±3% or ±0.1 m/s |
| AC Voltage | up to 600V |
| DC Current | up to 10A |
| Current Measurement Range | 0 to 10A |
| Temperature Measurement Range | 0 to 50 °C |
Button for turning the device ON and ESCaping current operations.
Button to select units (CFM/CMM) and perform zeroing.
Sensor component for measuring air velocity and flow.
Port for connecting Type K thermocouple probes.
Step-by-step guide for measuring air velocity using the anemometer.
Procedure for measuring temperature with a Type K thermocouple probe.
Steps for measuring relative humidity and ambient temperature.
Procedure for measuring light intensity in Lux or Foot-candle.
Instructions for measuring air flow in CFM or CMM units.
Function to freeze the current displayed reading.
Function to record and display maximum and minimum readings.
Feature to prevent automatic power off for prolonged use.
To Next Page
