EasyManuals Logo

Supco DAVM+ User Manual

Supco DAVM+
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
10
2) With the REC symbol on the display :
(a) Press the  REC Button  (3-3, Fig.1) once and the
 Max  symbol along with the maximum value will appear
on the display.
(b) Press the  REC Button  again, the  Min  symbol
along with the minimum value will appear on the display.
(c) To exit the memory record function, press the  REC
Button  continuously for at least 2 seconds. The display
will revert to the current reading.
(d) Clear the Max./Min. value recorded by pressing the
 Hold Button  (3-2, Fig.1) once. Previous recorded
Max./Min. value will be given up and then revert to the
REC. function keep on recording.
5-3 Auto Power Off Disable
In order to prolong the battery life, the instrument has Auto
Power Off  function. The meter will switch off automatically if
no buttons are pressed for around 10 minutes.
6. BATTERY REPLACEMENT
1) When the LCD display shows  symbol,
it is necessary to replace the battery. However measure
ment may still be made for several hours after the low
battery indicator appears.
2) Open the  Battery Compartment / Cover  (3-12, Fig.1)
and remove the battery.
3) Install a 9V battery (Alkaline or Heavy duty type) and
then reinstate the cover.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Supco DAVM+ and is the answer not in the manual?

Supco DAVM+ Specifications

General IconGeneral
BrandSupco
ModelDAVM+
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals