Super Flying Model EP-46K User Manual

No.EP-46K
MTH HOBBY PRODUCTS INDUSTRIAL CO., LTD.
www.mth.com.tw mthhobby@mth.com.tw
MTH HOBBY 2015
INSTRUCTION MANUAL
Warning
An RC aircraft is not a toy! If misused, it can cause serious bodily
harm and damage to property. Fly only in open areas, following all
instructions included with your radio.
Before beginning the assembly, remove each part from its bag for
inspection. Closely inspect the fuselage, wing panels, rudder and
stabilizer for damage. If you find any damaged or missing parts,
contact the place of purchase.
SPECIFICATION:
Wing span: 1200mm
Wing area: 41 dm
Length: 990mm
Weight: 1400g, including battery
Radio: 4 channels
FOKKER D.VII
1:7.4
Motor: 800~900 KV brushless
Thrust: 1.4 KGS and up
Battery: Li-Po 4-cell 2200mAh and up
ESC: 50A

Super Flying Model EP-46K Specifications

General

Brand	Super Flying Model
Model	EP-46K
Category	Toy
Language	English

Summary

Safety Warning for RC Aircraft Operation

Assembly Notice and Step-by-Step Guidance

Guidance on Planking and Directional Accuracy

Crucial advice on ensuring correct planking and directional accuracy during assembly steps.

Top Main Wing Assembly Instructions

Assembling Top Main Wing Components

Detailed steps for constructing the top main wing, including part fitting and gluing.

Bottom Main Wing Assembly Instructions

Assembling Bottom Main Wing Components

Detailed steps for constructing the bottom main wing, including part fitting and gluing.

Landing Gear Sub Wing Assembly

Landing Gear Sub Wing Assembly Steps

Step-by-step guide for assembling the landing gear sub-wing, focusing on part fitting and gluing.

Elevator Assembly Instructions

Assembling Elevator Components

Steps for assembling the elevator, including shaping edges and fitting parts.

Fuselage Assembly Guide

Fuselage Construction Steps

Detailed steps for constructing the fuselage, covering part fitting, gluing, and reinforcement.

Canopy Assembly and Finishing

Assembling and Detailing the Canopy

Instructions for assembling the canopy, applying paint, decals, and installing internal components.

Control Throws and System Setup

Aileron, Elevator, and Rudder Throws

Recommended throw amounts for ailerons, elevator, and rudder for optimal flight control.

Electronic System Wiring Diagram

Diagram illustrating the wiring connections for the electronic components of the EP version.