33 34
Apply the decorative sticker on both sides
of butt.
Apply the black sicker around the butt.
Apply the decorative sticker on the barrel.
Color the muzzle and trigger into black.
Place the machine guns inside the slots
on the canopy and use 2.0x6mm tapping
screw to secure them in place.
The top view of the machine guns on the
canopy.
Color the pilot as the flyer like.
Colored pilot for reference. (It is available
in the ARF version.)
Place the pilot inside the pilot seat. Use
2.6x8mm tapping screws and 3x10mm
washers to secure the pilot in place.
Don't screw too tight.
Completion of the canopy.
2 pieces of MW17 are for the strut. Use
sanding paper to trim the surface and
round edge (1R). The tips on the top and
bottom don't need the round edge.Wait
for applying film.
To Next Page
Loading...
