Super Handy GUT037 - User Manual

16 pages

Save Page as PDF

To Next Page

Manual

REV 04/22/20

WARNING:

Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety

rules and other basic safety precautions may result in serious personal injury.

Save these instructions in a safe place and on hand so that they can be read when required.

Keep these instructions to assist in future servicing.

Silent Wood Chipper

Main Page

Questions and Answers

L
laurenadamsAug 4, 2025
What to do if the material is not pulled in Super Handy Chipper?
- B
  Brenda NelsonAug 4, 2025
  If the material isn't being pulled into your Super Handy Chipper, it might be jammed in the feed inlet, the cutting blade could be blocked, or the discharge chute might be obstructed. To resolve this, first disconnect the power. Then, open the hopper and remove any jammed material from the feed inlet, and replace the hopper. If the blade is blocked, open the blade cover, clear the obstruction, and replace the cover. For a blocked discharge chute, open the hopper and the chute plate to remove any blockage, then replace the plate and hopper.
J
Jason WilliamsAug 18, 2025
How to fix motor that does not run in Super Handy Chipper?
- G
  greencathyAug 18, 2025
  If the motor of your Super Handy Chipper doesn't run, check that the unit is plugged into a working outlet and that the extension cord isn't damaged. If the overload protection has activated, remove any chips and press the reset button. Wait one minute before restarting the unit with the ON/OFF switch.

Summary

Intended Use

Safety Precautions

General Safety Guidelines

Comprehensive safety guidelines covering operating environment, personal attire, protective gear, and electrical safety.

Safe Operation Practices

Practices for safe operation including unit disconnection, cord handling, and maintaining alertness.

Storage and Maintenance

Storage Recommendations

Instructions for storing the garden shredder indoors in a dry, high, or locked-up place.

Maintenance and Inspection

Guidelines for keeping the unit clean, inspecting the extension cord, and checking for damaged parts.

Operating Environment and Safety

Tips on proper footing, avoiding overreaching, using the right appliance, and keeping children away.

Operating Tips

Pre-Operation Checks

Ensure the hopper inlet is empty and keep face/body away from openings.

Feeding Material Safely

Use the paddle, avoid forcing oversized objects, and remove foreign objects from material.

Handling Blockages and Clogs

Instructions on what to do if the cutting mechanism strikes an object or the shredder becomes clogged.

Assembly Instructions

Wheel and Cover Installation

Steps for installing the wheels and wheel covers onto the bracket.

Plastic Ring and Hopper Attachment

Instructions for installing plastic rings and securing the hopper to the upper feeding chute.

Power Part and Collection Box Installation

Steps for attaching the power part, support frame, and installing the collection box.

Operation Instructions

Starting and Stopping Procedure

Detailed steps for starting and stopping the garden shredder using the control panel.

Overload Protection

Explanation of the overload protection feature and how to reset the unit.

Blade Information

Details on reversible blades and recommendations for replacement.

Shredding Material Guidance

Best practices for feeding different types of garden waste, including material preparation and alternation.

Maintenance

Cleaning the Garden Shredder

Procedure for cleaning the shredder, including blades and discharge area, with safety warnings.

General Cleaning and Care

Tips on using damp cloths, soft brushes, and avoiding water or harsh cleaning agents.

Fastener Checks and Protection

Importance of checking screws, nuts, bolts, and protecting the blade with oil for storage.

Cutting Blade Replacement

Instructions and diagrams for replacing the cutting blade, noting orientation.

Exploded and Parts List

List of Accessories

Trouble Shooting

Motor Not Running

Diagnosing and resolving issues where the motor does not start or run.

Material Not Chopped

Troubleshooting when material is jammed or blocked in the feed inlet or discharge chute.

Worn Blade Resolution

Guidance on worn blades, including replacement and proper installation orientation.

Super Handy GUT037 Specifications

General

Brand	Super Handy
Model	GUT037
Category	Chipper
Language	English

Related product manuals

Super Handy LCE12

13 pages