Do you have a question about the Super Star 360 and is the answer not in the manual?
Channels | 40 |
---|---|
Mode | AM |
Microphone connector | 4-pin |
Frequency Range | 26.965 MHz to 27.405 MHz |
Modulation | AM |
Antenna Impedance | 50 ohms |
Power Supply | 13.8V DC |
Weight | 1.2 kg |
Type | CB Radio |
Power output | 4W |
Lists general technical parameters of the transceiver, including frequency range, tolerance, and operating temperature.
Details the technical specifications of the transmitter section, including power output and modulation.
Covers receiver sensitivity, selectivity, image rejection, IF frequency, and distortion.
Details RF gain, AGC, squelch, noise blanker, clarifier range, and audio output.
Guidance on selecting a location and mechanically mounting the transceiver and microphone bracket.
Steps for connecting the antenna, DC power input, and microphone.
Instructions for connecting the radio to negative or positive ground systems in vehicles.
Advice on antenna types, installation, and connection for optimal performance.
Explanation of the function of each control on the front panel.
Description of channel selection, LED indicators, and mode switches.
Details on using the meter for signal strength, power, SWR, and calibration.
Details on power, external speaker, CW key, and antenna connections.
Instructions for using the microphone for transmitting and receiving.
Step-by-step guide for turning on and setting up the receiver.
Recommended checks for SWR, electrical connections, coaxial cable, and hardware tightness.