Need help?Do you have a question about the Super X10SLM-F and is the answer not in the manual?
Introduces the motherboard, its design philosophy, and lists included retail box items.
Details the Intel C224/C222 Express chipset features and capabilities.
Describes special functionalities like AC Power Loss recovery.
Explains how the board monitors system health parameters like voltage and temperature.
Explains the Advanced Configuration and Power Interface features.
Details power supply requirements and recommendations for the motherboard.
Summarizes key feature differences between the X10SLM-F, X10SLL-F, and X10SLL-SF/-S models.
Provides crucial tips and references for using the motherboard layout and connectors.
Details the function and default settings of various motherboard jumpers.
Lists and defines the onboard headers and connectors on the motherboard.
Explains the meaning and status of different LEDs on the motherboard.
Lists supported CPU types and details memory slot configuration and capacity.
Identifies the chipset and lists the types and configurations of PCI Express slots.
Details SATA, USB, and Ethernet port configurations.
Covers PC Health Monitoring, ACPI, and power supply details.
Visual representation of the motherboard's internal architecture and component connections.
Provides industry-standard warnings and ESD precautions for safe installation.
Provides instructions for installing the CPU and its heatsink.
Guides the user through the process of installing DDR3 memory modules.
Outlines the process of physically installing the motherboard into a chassis.
Identifies and describes the various connectors, I/O ports, and front panel controls.
Introduces the use of jumpers to modify motherboard operation.
Provides general procedures to diagnose and resolve system issues.
Troubleshooting steps for systems that do not power on or display video.
Steps to diagnose memory errors and loss of CMOS setup configuration.
Outlines procedures for contacting support and answers common questions.
Provides instructions for battery removal, installation, and proper disposal.
Introduces the AMI BIOS Setup Utility and basic navigation.
Describes the initial BIOS setup screen and advanced configuration options.
Details CPU settings like Hyper-threading, C-States, and Turbo Mode.
Covers SATA mode selection, hot-plugging, and PCIe slot configurations.
Configures boot device priority and system security settings.
Provides options for saving changes, resetting, or discarding changes.
Lists beep codes and their corresponding error messages for diagnostics.
Guides on downloading and installing system drivers and utilities.
Explains how to install SuperDoctor 5 for hardware monitoring.
Introduces the Unified Extensible Firmware Interface (UEFI) concept.
Provides steps to recover BIOS using a USB device.
Introduces the Dual Boot Block feature for BIOS recovery.
Provides step-by-step instructions to reboot the system using JBR1 jumper.
General| Brand | Super |
|---|---|
| Model | X10SLM-F |
| Category | Motherboard |
| Language | English |
To Next Page
