SuperATV Half Windshield User Manual

INSTALLATION INSTRUCTIONS
© 2016 SuperATV.com
®
. All Rights Reserved. IN-HWS-CA-X3 10/12/2016
Windshield
SuperATV does not recommend keeping Windshield installed while transporting on an open air trailer.
2x - Clamp
Seal
M6-1.0 x 20mm Lg. BHCS4x
Use hand tools only when assembling.
Do not use power tools.
M6 Sealing Washer4x
2753 Michigan Road • Madison, Indiana 47250 • 855-743-3427
Thank You
For Choosing
Half Windshield: for Can-Am Maverick X3
Need help with your installation?
www.superatv.com
8:00am - 9:00pm EST M-Th
8:00am - 7:00pm EST Friday
9:00am - 2:00pm EST Saturday
sales@superatv.com
1-855-743-3427
Read instructions and view illustrations before beginning.

SuperATV Half Windshield Specifications

General

Width	Varies by model
Material	Polycarbonate
Features	Scratch-resistant
Vehicle Type	UTV
Compatibility	Varies by model

Summary

Half Windshield Installation

Component Identification

Identifies key components like clamps, sealing washers, and bolts for windshield installation.

Assembly Preparation

Instructions for preparing and installing the seal onto the windshield before mounting.

Mounting the Windshield

Guidance on placing the windshield onto the vehicle's cage and securing it with clamps.

Windshield Cleaning

Cleaning Precautions

Advises against using harsh chemicals, abrasive cleaners, or sharp tools for cleaning.

Recommended Cleaning Method

Details on rinsing, washing with mild detergent and soft cloth, and drying with a chamois.

Liability Statement